Admiral gas dryer not heating

Dryer Repair
1

We have an admiral gas dryer ADG7000AWW that will not heat, I have read thru some previous posted but I am not sure if the tips are the same for our dryer. We tried bypassing what we think is the thermal fuse to see if that was the problem but same results. We have also taken the front off and cleaned the whole thing out, lots of lint everywhere. We did not realize the vent house had come off the back and I think that is why there was so much lint. Also we checked it on both timed dry and auto dry, neither setting gets heat. Any suggestions?

3

Ok we will get one tomorrow and be ready to start testing. Thank you for replying so quickly.

4

— Begin quote from Gene;406750

You have to have a simple multimeter to perform the troubleshooting. Let us know when you ready and we’ll guide you through the tests.

Here are the breakdown diagrams and Replacement parts for ADMIRAL ADG7000AWW DRYER- GAS | AppliancePartsPros.com

Gene.

— End quote

We are ready! What’s next?

5

Sorry for the delay.

You can find the troubleshooting instructions in one of our previous threads: http://forum.appliancepartspros.com/dryer-repair/4743-no-heat-gas-dryer.html

Those parts in your dryer are shown as:

The cycling thermostat - 13 on the [diagram](http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5167371&diagram_id=28329459"]diagram[/URL].

The flame sensor - 13 on the diagram.

The high limit thermostat - #14 on the diagram.

The thermal fuse - #15 on the diagram.

The igniter - #11 on the diagram.

The gas valve coils - #2 on the [URL="http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5167371&diagram_id=28329457).

Gene.

6

Hi Gene. I noticed your in Orange County. I am a fireman in OC but live in Illinois. I am trying to help my 17 yo son figure out why the dryer wont heat. This over the phone. He has my dig. multi meter and I can talk him through the troubleshooting, but we cant figure out over the phone how to get to the ignitor and other parts. The last dryer I worked on had a kick panel on the front bottom of the dryer. This admiral ADG7000AWW apparently does not. Could you please tell me how to get into the dryer to check the electricals. Thankyou Lloyd