Hey. Hope someone can help me pinpoint my issue here. Just moved into a new house and previous owner left us a fridge. Originally, both banks were cool, not cold. Opened up the freezer area and sure enough, the evaporator fan was not turning. It would spin very slowly with a little help.
Replaced with new evaporator fan. Seemed to be working fine.
Shortly after, the fan began PULSING in about 2 second intervals.
Ran a manual defrost by pressing light button 5 times and the defrost coil got hot and water dripped off evaporator. After the defrost cycle completed, the blend door seemed to be clicking for about 2 minutes. Shortly after the fan has been running at full tilt.
If the fan goes back to pulsing like it did before, am I looking at a new ADC module or is there any tests anyone can suggest?
Thanks!