My JenAir dishwasher will go through the cycles until 32 minutes are left. Then, it stops and sounds like it is trying to go to the next cycle, but it doesn’t. When I open the door, the water is still in the bottom of the dishwasher. Sometimes, when I push the "drain" button on the front of the dishwasher, the dishwasher will drain and then go to the next cycle. Sometimes, when I just open and close the door several times, it will go to the next cycle. Today, it did not complete and I cannot re-start the dishwasher.
If I hit the drain button, the dishwasher tries to start the drain cycle, but just clicks on/off ever 5-10 seconds. The clicking sound is coming from something on the controller board (relay?). I’m thinking something on the controller board is shot, but I’d like to get a second opinion before I purchase the part online.
Any suggestions would be greatly appreciated.
Thx.