I just finished installing a new door latch assembly with micro switch on my kitchen Aird dishwasher. After long study, and wearing out the batteries in my flashlight,I discovered that, after removing the control panel, the best way to get to the clips on the latch assembly was to remove the 6 screws on the inside door panel. That allowed me the pry the panel up just enough to wiggle the full assembly out where I could handle it and carefully open the clips with a screw driver to get the micro switch part out and put the new one on. Care should be taken to not break the clip tabs while working with it, but full removeable so I could hold it properly made this very easy to accomplish.
johna0721:)