Kitchenaid Dual Element Control

[Firemann59]

I am trying to replace the control switch on my dual element ceramic burner but the instructions do not match my configuration. Here are the details:

OLD SWITCH: (wire labels)
#1 Red (A/B)
#2 Black (RL1)
#3 Red (LF3)
#4 Brown (LFN)
#5 Red (RL2)
#6 Orange (LFA)

NEW SWITCH: [conversion instructions]
P1 [connect to 2]
4 [connect to 3]
4a [connect to 4]
S2 [connect to 5]
2 [connect to N or (L2b)N]
P2 [connect to N or (L2b)N]

Can anyone tell me how to connect this new switch? Thank you for your help.

[libertyappl]

This may help.
Nat

[Firemann59]

OK, I goofed. After taking the switch completely out and examining it thoroughly in good lighting, I found that terminals 1 & 6 were actually not there and there was an N that I did not see. The switch is installed and working properly.