I washed a load one night and the next morning the china crystal light was flashing. The dishes looked clean and the dishwasher had drained properly. I pushed the cancel button and the cancel light started flashing with the china crystal light. I pushed the normal button and the normal light started flashing with the other two already flashing lights. All three lights flash in unison and at a steady rate. The dishwasher does not turn on or make any sound. I got a repair manual for it but it is for more than one model. I fond a black burned spot on the circuit board and so I replaced it. The dishwasher still does the same thing with the same lights flashing and will not turn on. I do not know where to go from here. I have tested door switches, heater element, and a few other things that the repair manual led me to and all seem to test out OK with an ohm meter. I am not well versed in A/C electrical testing. I know enough not to get injured or killed. I do not want to keep guessing and putting parts on that do not fix my dishwasher. Please help. Thank you.
Related topics
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
| Whirlpool Gold Silent partner III | 1 | 1347 | July 9, 2010 | |
| Dishwasher Lights Flashing | 2 | 2961 | October 22, 2012 | |
| Won't run cycle/clean light flashes | 9 | 14633 | June 26, 2018 | |
| Whirlpool dishwasher no longer runs - blinking lights | 1 | 1229 | February 23, 2015 | |
| Whirlpool Gold D/W flashing lights, inop | 1 | 2590 | November 21, 2011 |