Dryer runs, but will not heat.
What I have done:
[LIST=1]
*]Checked continuity at all points along path to element. No discrepancies. Getting 120volts at element. Unable to find an intermittent break anywhere in element, but ordered a new one (p/n 3403585/279838) anyway. Did not fix problem.
*]Noted Timer not advancing. Checked Timer Terminals per the Continuity Matrix in the schematic. Noted several discrepancies. Ordered new Timer (p/n 8299778) and installed. Did not fix problem. Similar Continuity discrepancies with new timer. Contacted vendor for replacement and re-ordered new Timer.[/LIST] I maintain $2.5 million helicopters for a living and use schematics (wiring diagrams) for much of my troubleshooting, but this simple dryer is kicking my butt!
Short of replacing the Timer…again…is there something I’m missing?
Any assistance appreciated. Thanks!!