GE Profile range with F5, F3, F2 errors

Oven Repair (including Ranges and Cooktops)
,
1

Hi,

I purchased a used oven and after about 6-12 months it started getting errors when the oven is used. It starts with an F5 error and then when I turn the oven off and back on it sometimes moves to an F3 error. Tonight it went for a bit and gave me an F3 and then later an F2 error. After I turned the oven off it would start beeping with an F2 error by itself. I opened the oven door to let it cool down and now it is quiet.

Any ideas on what parts I should replace etc. etc.?

thanks,
Matt

3

Matt,

Sounds like the problem is a bad control board. The model number you posted does not come up. Verify and repost it.

Gene.

4

This is indeed what the sticker on the bottom drawer shows for model number. I also could not find the model listed in any searches online. Could an ‘8’ be a ‘B’ or a zero be the letter ‘O’?
thanks,
m

5

— Begin quote from mpearson88;316478

Hi,

I purchased a used oven and after about 6-12 months it started getting errors when the oven is used. It starts with an F5 error and then when I turn the oven off and back on it sometimes moves to an F3 error. Tonight it went for a bit and gave me an F3 and then later an F2 error. After I turned the oven off it would start beeping with an F2 error by itself. I opened the oven door to let it cool down and now it is quiet.

Any ideas on what parts I should replace etc. etc.?

thanks,
Matt

— End quote

I have the same issues and think it is the conduit wire that goes from the control panel to the main unit.
I have this on order.