Thermador Burner Not Coming On and Oven Not Heating

Oven Repair (including Ranges and Cooktops)
,
1

The control knob for the left-front burner does not activate the burner on the stove - no ignition clicking, no gas coming out. Solenoid?

Also, oven only heating to about 150 degrees, flame (and gas) coming out continuously but at very low level. Orifice/Regular/Thermostat?

Please help on how to repair each, preferably with actual part numbers. Thanks!

3

If it’s less than a year old then do not do anything and call Thermador for the warranty service.

Gene.

4

Thanks. Ooops…input error on the drop-down…my Thermador over is actually around 10 years old.

5

The problem with the LF burner most likely is a bad potentiometer. Thermador has redesigned this part and sell it know as a kit included the simmer controller.

In order to find out what is wrong with the oven you have to measure the current drawn by the oven igniter wile it’s "on".

  • The part number for the simmer control kit is AP3672574

Here are the breakdown diagrams and http://www.appliancepartspros.com/partsearch/model.aspx?diagram_id=193545&&model_id=232141

Gene.