washer repair maytag 1 yr old

Washer Repair
,
1

the water keeps driping in the tub from top after the cycle is finished i have ordered inlet valve(1 problem)
this washer also has a auto water sensor on the load so it knows the amount of water to fill, it always fills to the top,(no am not opening the door after the cycle starts) so i ordered the sensor.(problem 2)
now looking for instructions on how to install or where to install. Please help.

thank you
sincerely

ashish

3

On your machine the console is held down with clips. You need to slide a thin but solid piece of metal (like a wide, think inflexible putty knife blade) under the end caps to release the clips. You can then service the consle and remove the clips that hold the cabinet to the back to get to the inlet valves.