First the spinning became slower and slower and eventually stopped spinning full turns. It also would drain the water but the clothes were so soaked it took 5 hours to get them to dry in the dryer. This occurred eventhough it advanced to each cycle.
When opening the machine, I saw the problem of a mice fried to the controller speed assembly board, ordered a new Part#134149220. Now the machine spins faster, it drains the water, but now idles in the middle of the rinse cycle. I have to stop and advance it to the final spin cycle to complete the load. Again, the clothes are extremely soaked. The final spin cycle seems to short and seems to be slowing down.
Could this part be defective or is another part needed?
Please help! Thanks so much for your assistance! 