Whirlpool Electric Dryer won't heat up

Dryer Repair
,
1

Last week I wrote about my dryer not heating up, I removed the heating Element which looked pretty fried. I received the new heating element today and replaced it, but it still will not heat up. Please help, what else could it be.

2

[LEFT][REPAIR MANUAL](http://sites.google.com/site/sublimeappliancerepair/washer-will-not-spin/agitator-woes/dryer-will-not-work/how-do-i-get-inside-my-dryer/gas-dryer-quits-heating/more-gas-dryer-enlightenment/gallery-of-dryer-parts-locations-and-diagrams/frigidaire-gibson-kelvanator-dryer-101/kenmore-whirlpool-englis-roper-dryer-notes/Whirlpool%20dryer.jpg?attredirects=0"][/URL][/LEFT]
[LEFT]1. Hi Limit (small limit upper right hand side of this pic) [/LEFT]
[LEFT] the most frequent problem if dryer RUNS but no heat. [/LEFT]
[LEFT]2. Heater assembly. 7. Control thermostat(s).[/LEFT]
[LEFT]5. Fuse(350F), if blown(open) the dryer will NOT run. 4. Heater element.

[URL="https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a45004fd9d6/3ffad75038c96fe4852571ca006cb80a/$FILE/L-58.pdf)[/LEFT]

3

If everything is good and you have paid the electric bill, then the timer could be bad.

4

— Begin quote from jcarroll1;131979

Last week I wrote about my dryer not heating up, I removed the heating Element which looked pretty fried. I received the new heating element today and replaced it, but it still will not heat up. Please help, what else could it be.

— End quote

Do you own and know how to use a multimeter. (volt-ohm meter)?

5

…